counter

yarn break sensor, digital meter counter, hall sensor and relay

 Yarn break sensor for winding, spinning, texturing machines

1. Digital meter counter

2. Yarn break sensor

3. Relay

4. Hall effect sensor

The setting way and operation :
1) We can set  three functions : "Length" , "Circumference" and "Rate"  of this Digital control box.  Press setting button  more than 0.5 seconds when setting
and the guiding light will switch from this three functions Sequentially .Each time the light is on , this  corresponding function is in the status of being setted
Press digit key to the digits which needs changing, press  "add 1" button , made this digits to be what needed, and then press function button to change other one.  When
Length, Circumference, and  Rate button light are  off, it means we are out of setting status. And now we can enter to operation status, press "Start/ Stop " button,you can
enter to start  and stop status . When stops,the stop light is on and when starts, the current length and wire length light are on. Press "function " button when it works , you
can get  the light switches from "current length" and " wire speed". And meaningtime transfer the monitoring number.
2)  When "current length" number is the same as the setting one, the machine will stop Automatically . And the light of full cap will be on. To avoid wrong operation,
we adivse the full cap buton  should be return to "0", so we can recover to new cap . If we need reset a new cap when it works , it is very hard to calculate after clearing to  "0".
When "full cap " button light flashes, it means we reset successfully. ( way of reset: press reset button or press digits key and button "1")
3) When the machine is running, the yarn broken or there is no yarn in the reaction area of yarn sensor, the digitial control box will auto stop.

counter